Slim Line filter housings are available in either reinforced polypropylene or clear, Styrene-Acrylonitrile (SAN). The clear polyproplyene housings are available in 5″, 10″, and 20″ lengths while the SAN (clear) housings are available in 5″ and 10″ lengths. The reinforced polypropylene housing caps are available with 1/4″, 3/8″ or 1/2″ NPT connections. Four bosses are molded into every cap for mounting purposes. Excellent for low-flow applications and when space and chemical compatibility are primary concerns.
The clear Slim Line housings offer on-site examination of flow, performance and cartridge life. Manufactured of clear, Styrene- Acrylonitrile (SAN), the sumps are stress relieved for added clarity and strength.
Molded from rugged reinforced polypropylene, these housings are ideal for under-sink and countertop residential filtration, pre- and post-reverse osmosis filtration, recreational vehicle filtration, food service, humidifying systems and light commercial and industrial filtration.
• Housing: Styrene Acrylonitrile (Clear) and Polypropylene (Opaque)
• Cap: Reinforced Polypropylene
• Button Assembly: 300-series Stainless Steel, Polypropylene and EPDM• O-Ring: Buna-N
• Maximum Temperature: 125 ̊F (51.7 ̊C)
• Maximum Pressure: 125 psi (8.62 bar)
Big Blue filter housings offer the versatility to meet all of your large- capacity filtration needs, including high-flow and heavy-sediment applications. The extra large housing allows for greater cartridge capacity, reducing the number of vessels required for high flow-rate applications. Sumps are constructed of durable reinforced polypropylene and are available in both 10″ and 20″ lengths.
The high-flow polypropylene (HFPP) cap is available with 3/4″, 1″ or 1 1⁄2″ NPT inlet and outlet ports. The 1 1⁄4″ internal port allows a greater volume of liquid to pass through the HFPP cap more rapidly.
Big Blue housings are compatible with a broad range of chemicals and are available with or without an optional pressure-relief button. They accept a wide variety of 4 1⁄2″ diameter cartridges in either 10″ or 20″ lengths.
ST Series stainless steel filter housings effectively provide heavy-duty filtration for smaller filtration systems and point-of-use applications. Supplying flow rates of up to 20 gpm (76 L/min.) at a maximum water temperature of 300 ̊F (149 ̊C), ST Series housings are ideal for hot water and high-pressure applications not suited for plastic housings. The brushed 304 stainless steel sumps are available with either a pipe plug or pet-cock in the bottom for draining. Heads are manufactured from nickel- plated cast-brass. All housings have 3/4″ inlet and outlet threads.
ST Series housings are easy to install and maintain. They are compatible with a complete range of filter cartridges, adding to their versatility.
